Iimveliso
ukuveliswa kwe-styrene-acrylonitrile copolymers
ukuveliswa kwe-styrene-acrylonitrile copolymers,
San Plastic Raw Material, Ukuhlaselwa kwe-SAN, SAN Raw Material,
Inkqubo iquka: (a) ukwazisa, kwisixhobo sokwenza umbane, [lacuna] umxube wokusabela oquka onke amanzi, iacrylonitrile, umqalisi okanye abaqalisi, i-arhente yogqithiselo lwetsheyini okanye ii-arhente kunye ne-arhente exhomayo okanye ii-arhente kwaye ngokuzithandela iqhezu elimiswe kwangaphambili letotali iyonke. umthamo we-styrene;(b) ukuvuselela umxube wokusabela kunye nokwandisa ubushushu bomxube wokusabela ukuya kuma-60 °C kwaye emva koko ukuya kwi-120 °C;(c) xa ubushushu bomxube wokusabela bufikelele kwi-60 °C okanye i-120 °C, ukongezwa kwesixa esishiyekileyo se-styrene, ukuze kugcinwe umlinganiselo we-styrene monomer/acrylonitrile monomer ratio kumxube wokusabela kulo lonke ixesha ukongeza;(d) ukunyusa iqondo lobushushu bomxube wokusabela ukuya kwi-140 °C kunye nokugcinwa kobu bushushu kangangexesha elaneleyo ukuzisa i-copolymerization ekugqityweni;kunye (e) nokupholisa umxube wokusabela kunye nokubuyiselwa kwe-styrene/acrylonitrile copolymer.Isicelo sokwenziwa kwee-SAN copolymers ezinomgangatho we-acrylonitrile ubuncinane wama-40 % ngokobunzima.
Iimpawu zeMveliso
| Inombolo yeCAS | 100-42-5 |
| I-EINECS No. | 202-851-5 |
| Ikhowudi ye-HS | 2902.50 |
| Ifomula yemichiza | H2C=C6H5CH |
| Iipropati zeMichiza | |
| Indawo yokunyibilika | -30-31 C |
| Indawo yeBoling | 145-146 C |
| Ubunzima obuthile | 0.91 |
| Ukunyibilika emanzini | < 1% |
| Ukuxinana komphunga | 3.60 |
Izithethantonye
Cinnamene;ICinnamenol;Diarex HF 77;I-Ethenylbenzene;NCI-C02200;Phenethylene;Phenylethene;Phenylethylene;Phenylethylene, inhibited;IStirolo(isiTaliyane);I-Styreen (isiDatshi);I-styrene (e-CZECH);I-Styrene Monomer (ACGIH);I-StyreneMonomer, iZinzile (DOT);Styrol (isiJamani);Isimbo;I-Styrolene;iStyron;Styropor;IVinylbenzen (CZECH);iVinylbenzene;IVinylbenzol.
Isatifiketi sokuHlalutya
| Ipropati | Idatha | Iyunithi |
| Iziseko | Inqanaba≥99.5%;inqanaba B≥99.0%. | - |
| Imbonakalo | ulwelo olunamafutha olungenambala olungenambala | - |
| Indawo yokunyibilika | -30.6 | ℃ |
| Indawo yokubilisa | 146 | ℃ |
| Ukuxinana okuzalanayo | 0.91 | Amanzi=1 |
| Ukuxinana komphunga | 3.6 | Umoya=1 |
| Uxinzelelo lomphunga ogcweleyo | 1.33(30.8℃) | kPa |
| Ubushushu bokutsha | 4376.9 | kJ/mol |
| Ubushushu obubalulekileyo | 369 | ℃ |
| Uxinzelelo olunzima | 3.81 | MPa |
| I-Octanol / i-coefficients yokwahlula kwamanzi | 3.2 | - |
| Indawo yokuflasha | 34.4 | ℃ |
| Ubushushu bomlilo | 490 | ℃ |
| Umda wokuqhushumba ophezulu | 6.1 | %(V/V) |
| Ukunciphisa umda wokudubula | 1.1 | %(V/V) |
| Ukunyibilika | Ayinyibiliki emanzini, inyibilika kwi-alcoho nakwizinyibilikisi ezininzi eziphilayo. | |
| Isicelo esingundoqo | Isetyenziselwa ukwenza i-polystyrene, irabha eyenziweyo, i-ion-exchange resin, njl. | |
Ukupakishwa kunye nokuhanjiswa
Iinkcukacha zokuPakisha:Ipakishwe kwi-220kg / idrum, i-17 600kgs / 20'GP
I-ISO TANK 21.5MT
1000kg/drum, Flexibag, ISO tanks okanye ngokwesicelo somthengi.
Isicelo seMveliso
Isetyenziselwa ukwenza iirabha, iiplastiki kunye neepolymers.
a) Ukuveliswa kwe: i-polystyrene enokwandiswa (EPS);
b) Ukuveliswa kwepolystyrene (HIPS) kunye neGPPS;
c) Ukuveliswa kwee-styrenic co-polymers;
d) Ukuveliswa kweentlaka zepolyester ezingaxutywanga;
e) Ukuveliswa kwerabha ye-styrene-butadiene;
f) Ukuveliswa kwe-styrene-butadiene latex;
g) Ukuveliswa kwee-styrene isoprene co-polymers;
h) Ukuveliswa kwe-styrene based polymeric dispersions;
i) Ukuveliswa kweepolyoli ezizaliswe ngokupheleleyo.I-styrene isetyenziswa kakhulu njenge-monomer ekwenzeni iipholima (ezifana ne-polystyrene, okanye irabha ethile kunye ne-latex)
